How-To Use Diamanté Designs

IMG_4325.jpeg

Simple to Apply

Creating a Diamanté Design is simple!

Using a Stencil

1. Clean the skin with water. 

Q-voe Tip: Do not clean the skin with alcohol. Alcohol will prematurely dissolve the Adhesive before you even start.

2. Apply Stencil to clean and dry skin.

3. Apply a thin layer of MirAdhesive and wait for it to dry clear

Q-voe Tip: Remove the Stencil before the glue dries to eliminate lifting the edges.

 4. Gently brush on one or multiple Glitter jewels.

Q-voe Tip: Depending on the brush you use you can achieve different blending effects. 

Q-voe Tips: For best results and optimal shine, Glitter Jewels  were designed to be paired with MirAdhesive. Using other glitters may clog the pores and results will varyFor more options you can use Q-voe Mineral Pigments, for more matte creations.

Creating Freehand

1. Clean the skin with water. 

Q-voe Tip: Do not clean the skin with alcohol. Alcohol will eat the Adhesive before you even start.

2. Determine what you want to create and apply a thin layer of MirAdhesive on clean and dry skin.

Q-voe Tip: Play around with different brushes form our Stokes collection to get different effects.

3. Wait for MirAdhesive to dry clear 

Q-voe Tip: If you lose track of Adhesive placement tilt in the light. MirAdhesive has a slight hue of gloss when it hits the light.

 4. Gently brush on one or multiple Glitter jewels.

Q-voe Tip: Depending on the brush you use you can achieve different blending effects. 

Q-voe Tips: MirAdhesive is designed to be paired with Glitter Jewels.

DO NOT use other glitters as they may clog the pores.

Easy to Remove

MirCleaner

is a Removal Must-Have

To remove a Diamanté Design.

1. Grab a cotton swab and spray with MirCleaner.

2. Soak the unwanted design for 30 seconds and gently rub to remove.

Q-voe Tip: If you make a mistake when creating your design and want to clean the edges use a

q-tip with MirAdhesive to erase mistakes.

Q-voe Tips: Since MirCleaner is how you remove MirAdhesive, do not use around the eyes and mouth.

If you want to use Glitter Jewels around the eyes and mouth use our Vitamin. E Base. It will be waterproof but not Smudgeproof.

IMG_5229.jpg

Tattoo Enhancement

1. Clean the skin with water. 

Q-voe Tip: Do not clean the skin with alcohol. Alcohol will eat the Adhesive before you even start.

2. Determine what part of your tattoo you want to accentuate.

Q-voe Tip: Do not enhance the whole tattoo. The point is not too cover up, but to enhance the Tattoo, making it 3D and have it come to life. 

3. On clean dry skin apply MirAdhesive  and wait for it to dry clear. 

Q-voe Tip: If you lose track of Adhesive placement tilt in the light. MirAdhesive has a slight hue of gloss when it hits the light.

 4. Gently brush on one or multiple Glitter jewels.

Q-voe Tip: Depending on the brush you use you can achieve different blending effects. 

Q-voe Tips: MirAdhesive is designed to be paired with Glitter Jewels.

DO NOT use other glitters as they may clog the pores.

Contact Us

Join the fun at

  • Instagram
  • Facebook
  • YouTube
  • Pinterest
  • Amazon